Caring for hand block-printed cotton
· 2 min read
Hand block-printed cotton is made by pressing carved wooden blocks dipped in dye onto the cloth, one stamp at a time. A little care keeps the prints looking good for years. Here is a simple routine.
The first wash
Wash a new block-printed piece alone, the first time. Use cold water and a mild liquid detergent. Turn the garment inside out, so the printed side rubs less against itself.
Do not soak it for long. Ten to fifteen minutes is enough. Gently press and swirl the garment in the water, and avoid scrubbing or wringing hard. Rinse in cold water until the water runs clear.
It is normal to see a little colour in the water the first time. Block-printed cloth is often dyed with traditional methods, and loose dye that has not fixed into the fibre rinses away. This does not mean the garment is faulty, and the colour usually settles after the first wash or two. If you wash it with other clothes at this stage, those clothes may pick up some of the dye, so keep it separate until the water runs clear.
Everyday washing
Drying and ironing
Dry your block-printed cotton in the shade. Strong afternoon sun can fade deep colours over time. Hang it on a hanger or a line, and shake it out gently to let the cloth settle.
Iron while the cloth is slightly damp, using the cotton setting. Iron on the reverse side, so the heat does not flatten or shine the printed surface. If you must iron the front, place a thin cotton cloth between the iron and the print.
Storing it
Store the garment folded or on a hanger in a cool, dry place. Make sure it is fully dry before you put it away. Keep light and dark prints apart, and avoid storing in plastic for a long period, as cotton likes to breathe.
Small variations in the print, such as a slightly uneven edge or a tiny gap between stamps, are part of what makes a hand-printed piece. They show that a person made it. With gentle washing and shade drying, the colours should soften slowly and look good for a long time.